Every KMP racing wheel is built on the same platform, but not every driver needs the same wheel. A car used for evening road miles and the occasional trackday has different demands than a stripped track car or a full competition build.
The KMP Standard Steering Wheel Range: CLUBSPORT, CLUBSPORT Nürburgring and PRO-LineEvery KMP racing wheel is built on the same platform, but not every driver needs the same wheel. A car used for evening road miles and the occasional trackday has different demands than a stripped Nordschleife car or a full competition build. For that reason KMP designs three standard wheel types per car model: CLUBSPORT, CLUBSPORT Nürburgring and PRO-Line. Each has a fixed, model specific button layout that has already been developed, tested and documented, and each is held in stock.
This article explains what defines each line, what the standard options are, and where the custom build route begins.
All three lines share the same engineering base. That is what makes a fixed layout possible without giving up capability.
| Property | CLUBSPORT | CLUBSPORT Nürburgring | PRO-Line |
|---|---|---|---|
| Intended use | Street with track capability | Track focused, road usable | Track and competition |
| Function scope | All factory wheel functions | Most factory functions plus race controls | Race controls, selected car functions |
| Button type | Illuminated, laser etched, OEM look | Illuminated, laser etched, OEM look | Coloured high actuation force, aviation and military type |
| Glove compatible | Occasionally use of gloves | Occasionally use of gloves | Perfect for driving often with gloves |
| Illumination | Yes, dims with interior lighting | Yes, dims with interior lighting | No illumination on the wheel |
| Standard button count | Up to 10 plus rotary or joystick, model dependent | Up to 10 plus rotary or joystick, model dependent | 4, 6, 8 or 10, model dependent |
| Standard finish | Suede, Alcantara or leather | Suede, Alcantara or leather | Suede, Alcantara or leather |
| Installation | Plug and play | Plug and play plus additional wiring for race functions | Plug and play plus additional wiring for race functions |
| Layout | Fixed per car model | Fixed per car model | Fixed per car model |
The CLUBSPORT was conceived as an OEM+ wheel: it keeps the full factory function set intact, and adds motorsport hardware on top. It is the wheel for a car being built into a track tool by a driver who still needs everything the factory wheel did.
It is also the most straightforward wheel in the range to fit. The CLUBSPORT is genuinely plug and play, with no additional wiring required beyond the standard connection, unless noted for a specific car model.
The push buttons are laser engraved rather than printed or stickered, so the symbols do not wear off over the life of the wheel. Their illumination is tied to the car’s own interior lighting and dims with it, so in the evening the buttons stay legible without being too bright.
Choose CLUBSPORT if: the car is road registered or dual use, you want everything the factory wheel did, and you want a straightforward plug and play installation.
The Nürburgring edition is the more race-focused wheel in the range, developed together with well known racing teams around the Ring. It keeps the same OEM+ look and feel as the CLUBSPORT: the same illuminated, laser engraved buttons and the same factory integration with no error codes. What changes is what those buttons do.
Once a car has a racing seat, a fixed wheel position and a driver in a helmet, gloves and a HANS device, the factory stalks and console switches become awkward to reach. The Nürburgring layout moves the controls that matter at speed onto the wheel face:
The button field is finite, so the Nürburgring layout carries most factory functions rather than all of them, with some comfort functions giving way to the race controls. Several of those race controls also draw on signals that are not on the standard connection, so unlike the plug and play CLUBSPORT this wheel needs some additional wiring. All of the required wiring, connectors and instructions are supplied with the kit.
Choose CLUBSPORT Nürburgring if: the car sees regular track and touristenfahrten use, still needs to work on the road, and the driver is in full safety gear when it matters.
PRO-Line is the competition wheel in the range, and the one place the OEM+ look and feel is set aside completely. It is built for a car that only sees the track, so it drops the factory appearance and carries the controls a driver reaches for on track rather than the full factory function set.
The buttons are coloured, high actuation force buttons, of the type used in aviation and military applications. Each one takes a firm, deliberate press, so a gloved hand, a kerb strike or vibration will not trigger it by accident, and the switch break is clear enough to feel through a glove. They are not illuminated, because this wheel is not trying to look like a factory part.
The function set is chosen for what a driver actually reaches for on track: flash to pass, horn, turn indicators, traction and stability control settings, wipers, hazards, pit limiter, start and stop and speed increments. It is offered as fixed presets per car model, in 4, 6, 8 and 10 button configurations, depending on the platform and how much of its electronics can be addressed. As with the Nürburgring, several of these race functions need some additional wiring.
Choose PRO-Line if: the car is a dedicated track or competition build, comfort functions are irrelevant, and switch feel under race conditions outranks appearance.
Every wheel is supplied as a complete kit, ready to fit. Below is what comes as standard, and the items you can change within it without leaving the stocked product.
The layout is fixed. The wheel around it is not. Several of the items above can be changed.
To keep the standard kit cost effective, it is supplied without a quick release. Three routes are available:
All adapter and boss options retain factory steering column adjustment.
Eight RGB LEDs sit behind smoked black light tubes in the carbon plate. The standard sequence is two green, two blue, two yellow, two red, then all LEDs flashing red.
The default configuration is a 7000 RPM maximum with a 200 RPM delta, meaning the first LED illuminates at 5600 RPM. Maximum and delta RPM are user programmable on the wheel via a defined button sequence, in 1000 RPM and 100 RPM steps, with a green flash confirming successful calibration. Brightness follows the interior dim light switch where fitted, or the integrated light sensor. With the light switch off, the shift lights do not illuminate.
The three standard wheels exist because most customers want a proven layout, in stock, with a documented installation. When they do not, the options are effectively endless.
A custom build starts from the same GEN3 platform and the same communication architecture. Depending on car model, over 60 functions are available, and you can specify:
Custom layouts carry additional cost and lead time. Two constraints are worth stating up front: a function has to exist in the car from the factory before it can be mapped to the wheel, and some functions require wiring work beyond the plug and play harness. Our sales engineers will confirm both against your specific vehicle before anything is built.
The short version. If the car still lives on the road and you want everything the factory wheel did on better hardware, take the CLUBSPORT. If it sees regular track use but still has to work on the road, and you want the race controls under your thumbs, take the CLUBSPORT Nürburgring. If it only sees the track and you want switchgear built for gloves and a helmet, take the PRO-Line. If none of those is quite right, a custom build starts with a conversation.
All three are designed, built and stocked in the Netherlands, per car model, ready to ship.
Visit the KMP Automotive Electronics webshop Contact our sales teamFor off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.