Steering wheel hub for the 86-tooth, 25.6 mm spline used across VAG, Porsche and older Mercedes models, confirmed on the Porsche 991.1, 991.2 and 992 and the VW Golf MK7 GTI and R. 7075 aluminium, factory clockspring and unlocking pin retained, six M5 threads on 70 mm PCD.
SKU 01.06.11005 · € 200 ex VAT · Automotive Electronics / Hubs
The 86-tooth, 25.6 mm spline appears on many VAG group cars, and this 7075 aluminium hub is machined to it. Confirmed fits are the Porsche 991.1, 991.2 and 992, from Carrera to GT3 RS, and the VW Golf MK7 GTI and R; it has also been tested on the Golf MK5 and MK6, the Scirocco, the Porsche 997, Audi models and the Mercedes W124, W126, W129, W140 and W201. Measure the shaft before ordering. The factory clockspring stays in service, unlocking pin included.
Six M5 threads on a 70 mm pitch circle diameter (PCD) carry a quick release adapter or a motorsport wheel, and mounting hardware is included. Builds without a clockspring use the VAG Universal Race hub. For the Porsche 991 and 992 and the Golf MK7, KMP's Clubsport and PRO-Line steering wheels are made for the same cars.
For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.
| Material | Aluminium 7075 |
|---|---|
| Wheel mounting | 6x M5 on 70 mm PCD |
| Clockspring | Compatible, including the unlocking pin |
| Spline | 86 teeth |
| Spline diameter | 25.6 mm |
Supplied
The Porsche 991.1, 991.2 and 992 and the VW Golf MK7 GTI and R. Other VAG, Porsche and Mercedes models with the 86-tooth, 25.6 mm spline have been tested; measure the shaft before ordering.
Yes, including the unlocking pin. The VAG Universal Race hub is the alternative for builds without a clockspring.
A quick release adapter or a motorsport steering wheel with a 70 mm PCD, held by six M5 bolts.