Race hub for the 86-tooth, 25.6 mm spline used across VAG, Porsche and older Mercedes models, confirmed on the Porsche 991.1, 991.2 and 992 and the VW Golf MK7 GTI and R. Black anodised 7075 aluminium, 115 mm across, for builds without a clockspring; six M5 threads on 70 mm PCD.
SKU 01.06.12005 · € 150 ex VAT · Automotive Electronics / Hubs
Porsche 991 and 992 cup and club cars, and Golf MK7 track builds, often run without a clockspring, and this race hub fits their 86-tooth, 25.6 mm spline without welding. Other tested fits are the Golf MK5 and MK6, the Scirocco, the Porsche 997, Audi models and the Mercedes W124, W126, W129, W140 and W201; measure the shaft before ordering. The hub is black anodised 7075 aluminium, 115 mm across and 50 mm high, made in the Netherlands.
Six M5 threads on a 70 mm pitch circle diameter (PCD) mount a racing wheel or any KMP adapter, from the crash hub to the quick release and the quick release connector. Mounting hardware is included. When the clockspring stays, the VAG Universal Steering wheel hub is the matching part.
For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.
| Material | Aluminium 7075, black anodised |
|---|---|
| Wheel mounting | 6x M5 on 70 mm PCD |
| Clockspring | Not used |
| Spline | 86 teeth |
| Spline diameter | 25.6 mm |
| Outer diameter | 115 mm |
| Total height | 50 mm |
Supplied
The Porsche 991.1, 991.2 and 992 and the VW Golf MK7 GTI and R. Other cars with the 86-tooth, 25.6 mm spline have been tested; measure the shaft before ordering.
No, this hub is for builds without a clockspring. Use the VAG Universal Steering wheel hub to keep it.
A racing wheel or a 70 mm PCD adapter such as the KMP crash hub, quick release or quick release connector.