Plug-and-play paddleshift kit for the Porsche 997 CUP that converts the manual sequential G97 gearbox to paddle operation, with no clutch needed for shifting during the race. Connects to the existing Porsche harness, includes software and a communication cable, and is offered per model year with a gearbox or gear lever mounted shift cylinder.
SKU 01.00.001XX · € 8700.00 ex VAT · Motorsport / Paddleshift kits
On the Porsche 997 CUP the sequential G97 gearbox is shifted by hand from the factory. This kit moves the shift onto paddles, so the driver's hands stay on the steering wheel and the clutch is no longer used for shifting during the race. Because the shift itself is regulated by the system, the gear change is more consistent and the risk of damage to the gearbox dogs is lower. All components are designed to fit directly into the car: no brackets to design, no cables to solder, and the motorsport-quality wiring harness connects straight into the existing Porsche harness. The same plug-and-play approach means the system can be taken out again and the car restored to its original state.
Most cars run the gearbox-mounted shift cylinder, which allows the gear lever to be removed. Reverse, neutral and first gear are then protected by clutch pressure: N or 1st can only be selected with the clutch pressed. The lever-mounted version keeps manual shifting available as well. The kit is matched to the model year through the throttle blip. MY07-08 cars have a GEN1 throttle body and the blip cylinder mounts on the throttle pedal, while MY09 and MY10-12 cars have a GEN2 throttle body with the blip cylinder mounted directly on it. A communication cable and the setup software are included, and a KMP support engineer can log in remotely to do the initial paddleshift setup together with the driver or mechanic.
| Vehicle | Porsche 997 CUP |
|---|---|
| Gearbox | G97 sequential |
| Model years | MY07-08, MY09, MY10-12 |
| Shift cylinder mounting | Gearbox or gear lever |
| Blip cylinder | Throttle pedal (MY07-08), throttle body (MY09, MY10-12) |
Supplied
Support
Choose by model year and the throttle body fitted. MY07-08 cars have a GEN1 throttle body; if a MY07-08 car has been upgraded to a MY09-style throttle body, the MY09 kit is the right choice. Please verify the throttle body style before ordering.
With the gearbox-mounted shift cylinder the gear lever can be removed, and N or 1st can only be selected with the clutch pressed. With the lever-mounted cylinder the gears can still be shifted manually as well.
Yes. The kit is plug and play and connects into the existing Porsche harness, so the system can be removed and the car restored to its original state.