The pre-facelift Nissan R35 GT-R gets its own Clubsport, matched to the layout of its factory wheel: cruise control with set, resume, cancel and on/off, phone and voice, the MRK button, source and engine start/stop on ten illuminated laser-etched buttons, volume on one rotary encoder and seek on the other. Carbon magnetic paddles, suede, Alcantara or leather.
SKU 01.06.84001 · € 1400 ex VAT · Automotive Electronics / Racing wheels
The pre-facelift Nissan R35 GT-R gets its own Clubsport, matched to the layout of its factory wheel. Cruise control with set, resume, cancel and on/off, phone and voice, the MRK button, source and engine start/stop sit on ten laser-etched push buttons that illuminate with the dashboard, while one rotary encoder carries volume and the other seek. A press longer than one second reaches the second function of a button. The factory paddle harness plugs into KMP's carbon magnetic paddles on a 7075 aluminium mechanism and hub, so the GT-R shifts with a defined, repeatable action instead of the original paddles.
The kit connects at the clockspring behind the column cover: the supplied harness loops through the original connectors and the airbag bridge takes the airbag circuit, so no wire is cut and the OEM wheel can be refitted. The hub goes onto the steering shaft with the original nut, and the step-by-step instructions cover the column cover, the steering angle sensor and the connector order. The complete kit includes the hub, electronics and wheel, with an optional crash-hub or quick release with integrated Deutsch Autosport connector, finished in suede, Alcantara or leather. A wheel engineered for the track that still behaves on the street.
For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.
| Wheel diameter | 330 mm |
|---|---|
| Total height | 150 mm |
| Controls | 10 buttons + 2 encoders |
Steering wheel assembly
Additional items
No. The facelift R35 has its own Clubsport with the later factory layout, including a back button and Enter on the seek encoder. This wheel is specified for the pre-facelift R35.
The airbag module and the factory wheel come off, the column cover comes off to reach the clockspring, and the supplied harness and airbag bridge plug into the original connectors in the order the instructions give. The hub then goes onto the shaft with the original nut and the wheel onto the hub. No wire is cut.
Yes. The factory paddle harness connects to the KMP carbon magnetic paddles, so up and down shifts work as before with a more defined action.