Mercedes Steering wheel hub

Steering wheel hub for the Mercedes C-Class and most A, B, E, M, S and V-Class steering shafts with the 66-tooth, 20.8 mm spline. Machined from 7075 aluminium, it keeps the factory clockspring and its unlocking pin, and carries a quick release adapter or motorsport wheel on six M5 threads, 70 mm PCD.

SKU 01.06.11004 · € 200 ex VAT · Automotive Electronics / Hubs

Mercedes used a 66-tooth, 20.8 mm steering shaft spline on the C-Class and on most A, B, E, M, S and V-Class models, and this hub is machined from 7075 aluminium to that fit. It mounts directly on the column, measures 130 mm across at 57 mm high, and is built around the factory clockspring, which stays in the car with its unlocking pin.

On the wheel side, six M5 threads on a 70 mm pitch circle diameter (PCD) accept a quick release adapter or a motorsport steering wheel. Mounting hardware comes in the box. A Mercedes build that removes the clockspring uses the Mercedes Race hub instead. Check the shaft spline before ordering for models outside the C-Class.

For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.

Technical specifications

MaterialAluminium 7075
Wheel mounting6x M5 on 70 mm PCD
ClockspringCompatible, including the unlocking pin
Spline66 teeth
Spline diameter20.8 mm
Outer diameter130 mm
Total height57 mm

What's in the box

Supplied

FAQ

Which Mercedes models does it fit?

The C-Class is confirmed, and most A, B, E, M, S and V-Class models share the 66-tooth, 20.8 mm spline. Check the spline on the car before ordering.

Is this the hub for a car that keeps its clockspring?

Yes. The clockspring and its unlocking pin stay in use. For builds without a clockspring, the Mercedes Race hub is the black anodised alternative.

What bolt pattern is on top?

Six M5 threads on a 70 mm PCD, for a quick release adapter or a motorsport steering wheel.

Home · Automotive