The 991 GT3 Cup wheel layout for the 991 GT3 RS with PDK, with the centre console switches on the rim. Pit limiter, Sport, TC off, TC + ESC off, Exhaust, Lift, high beam and horn sit on carbon button plates around a suede rim, with PDK paddles behind it. Plug-and-play on the factory wiring, on a fixed spacer or a quick release; other Porsche models on request.
SKU 01.06.02076 · € 2300.00 ex VAT · Automotive Electronics / Racing wheels
In a 991 GT3 RS the driver reaches down to the centre console for Sport, traction control and the exhaust flap. This wheel brings those switches up to the rim, in the layout of the 991 GT3 Cup car: 8 push buttons on carbon fibre plates, laser-engraved with Pit Limiter, Horn, Exhaust, Lift, High Beam, Sport, TC Off and TC + ESC Off, around a suede rim with a yellow centre marker. The PDK shifts through the paddles behind the wheel. The wheel is made for the 991 GT3 RS; for other Porsche models it is available on request.
The electronics inside the wheel simulate the OEM steering wheel towards the car, so removing the original wheel and airbag leaves no error codes and no airbag light. The supplied harness connects the clock spring, the console switch unit and the airbag bridge. A toggle switch, mounted in the centre console or below the steering column, selects whether the console unit or the wheel is on the communication line; the two do not operate at the same time. The headlight flash takes one splice at the column connector, described in the manual. The hub mounts on the column with the original bolt and the wheel on the hub with six T25 bolts. As standard the wheel comes on a fixed 44 mm spacer with a curly cable; a quick release with curly cable, or a quick release with the connector integrated in the coupling, is chosen as the variant. Custom layouts are possible on request through KMP sales.
For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.
| Controls | 8 buttons + 2 shift paddles |
|---|---|
| Adapter | Fixed 44 mm spacer, quick release with curly cable, or quick release with connector |
Steering wheel assembly
Additional items
No. The electronics in the wheel simulate the OEM steering wheel, and the supplied airbag bridge plugs into the airbag connector at the clock spring, so there are no error codes and no airbag light after installation.
The 991.1 and 991.2 GT3 RS with PDK as standard. For other Porsche models, including the non-RS 991, the wheel is available on request; contact KMP sales before ordering.
The fixed 44 mm spacer and the quick release with curly cable both keep a curly cable between the wheel and the hub, so the wheel can be taken off the quick release but stays connected to the car. The quick release with connector carries the wiring through the coupling itself, so the wheel comes out of the car completely.