Aluminium spacer for the car side of a quick release with connector: it sits between the quick release and the steering shaft adapter and brings the curly cable out at the back of the coupling. Strain relief for 6-core and 12-core curly cables, 8 mm thick, 7075 aluminium in black, 70 mm PCD, six bolts supplied.
SKU 01.06.07950 · € 45 ex VAT · Adapters / Automotive Electronics / Motorsport / Other
Behind a quick release with integrated connector the wiring still has to follow the steering: on the car side a curly cable takes up the rotation of the wheel. The KMP Curly cable spacer gives that cable a way out. The 8 mm ring is mounted between the car side of the quick release and the steering shaft adapter, usually a race hub, and the curly cable leaves the back of the coupling through the cut-out in the ring. Two strain relief points hold it in place, for a 6-core and for a 12-core curly cable. The spacer is machined from 7075 aluminium, finished in black, on a 70 mm pitch circle diameter (PCD).
It is mostly combined with the KMP Quick release connector (01.06.00251), often together with the KMP QRC Spacer (01.06.00206) on the wheel side, but the 70 mm PCD pattern fits other hubs and quick releases with the same bolt circle too. The curly cable with a 110 mm curly section is the usual choice and is ordered separately. Six mounting bolts are supplied.
| Material | Aluminium 7075 |
|---|---|
| Finish | Black |
| Thickness | 8 mm |
| PCD | 70 mm |
| Cable strain relief | 6-core and 12-core curly cable |
Supplied
Between the car side of the quick release and the steering shaft adapter, which is usually a race hub. The curly cable comes out of the back of the coupling through the cut-out in the spacer.
There is a strain relief point for a 6-core and for a 12-core curly cable. The version with a 110 mm curly section is used most often. The cable is not part of this product.
Yes. Six mounting bolts are supplied with the spacer.