Crash hub for racing steering wheels, built from 2.5 mm sheet metal with predetermined bending points and welded onto an additional plate, so the column-side structure deforms in a controlled way on impact. 70 mm PCD with six M5 insert nuts on one side, black powder coated, 92 x 42 mm.
SKU 01.06.00165 · € 112 ex VAT · Adapters / Automotive Electronics
The KMP Crash-hub sits between the steering hub and the racing wheel and is made to deform in a controlled way rather than stay rigid. It is constructed from 2.5 mm thick sheet metal with predetermined bending points, welded onto an additional sheet metal plate, and has passed the testing procedures set out in the TÜV documentation (there is no official TÜV documentation available). The finish is black powder coating.
The crash hub uses the 70 mm pitch circle diameter (PCD) of the KMP hubs and wheels, with six M5 insert nuts on one side, so it fits between a KMP steering wheel hub or race hub and the wheel, the quick release or the quick release connector. Outer dimensions are 92 x 42 mm.
For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.
| Material | 2.5 mm sheet metal with predetermined bending points |
|---|---|
| Outer dimensions | 92 x 42 mm |
| PCD | 70 mm |
| Mounting | 6x M5 insert nuts, one side |
Supplied
The 2.5 mm sheet metal has predetermined bending points, so the hub deforms in a controlled way under a heavy load instead of passing it on unchanged. It is welded onto an additional sheet metal plate.
It uses the 70 mm PCD with six M5 insert nuts on one side, the pattern of the KMP steering wheel hubs, race hubs, wheels and quick releases.