Dual valve block for builds that run the paddleshift logic from a motorsport ECU instead of the complete KMP kit. It combines a pressure sensor, a pressure relief valve and two valves in one block, with a D6 inlet, two D4 outlets, an AS007-35PN chassis connector and a mounting bracket with four rubber feet.
SKU 01.01.09100 · € 1150.00 ex VAT · Motorsport / Paddleshift components
Most current motorsport ECUs have paddleshift control functions in their software. For those builds the dual valve block is the pneumatic part of the system without the complete KMP kit. The block holds a pressure sensor, a pressure relief valve and two valves, one for each shift direction (electronic throttle blip needed). The inlet is a D6 adapter, the outlets are two D4 adapters, and the electrical side is an AS007-35PN chassis connector.
A mounting bracket with four rubber feet is included, so the block is isolated from vibration wherever it is fitted. The mating connector, Deutsch AS607-35SN, is not included and is listed separately.
| Valves | 2, plus pressure sensor and pressure relief valve |
|---|---|
| Inlet | D6 |
| Outlets | 2 x D4 |
| Connector | AS007-35PN chassis connector |
Supplied
Not included
When the ECU already provides the paddleshift control functions and has electronic throttle blip control. The valve block then supplies the pneumatic switching and the pressure sensor, and the ECU runs the logic.
The block has an AS007-35PN chassis connector. The mating Deutsch AS607-35SN is not included and is available separately.
The dual valve block with pressure sensor, pressure relief valve and two valves, plus a mounting bracket with four rubber feet.