Reusable Goodridge 600 Series hose end in anodised aluminium for D6 hose, female, in a straight, 45 degree or 90 degree version. Fits the D6 Teflon hose that connects the air buffer outlet to the valve block inlet in a KMP paddleshift system, and is assembled with hand tools.
SKU 01.09.006X · € 22.50 ex VAT · Motorsport / Other
The D6 ports of a KMP pneumatic paddleshift circuit, the air buffer outlet and the valve block inlet, take this fitting: a Goodridge 600 Series reusable hose end in anodised aluminium, female, for stainless braided hose in size D6. It comes in three angles chosen on this page: straight (Goodridge 6001-06D), 45 degree (6046-06D) and 90 degree (6091-06D). The hose is assembled with hand tools, and the fitting can be taken off and refitted when the line changes.
KMP recommends this hose and fitting type for the pneumatic circuit of its paddleshift systems, together with the D6 Teflon hose. A straight fitting suits a line in free space; the angled versions turn the hose at the port where there is little room. Each order line is one fitting in the chosen angle; a D4 version is available for the D4 lines of the circuit.
| Hose size | D6 |
|---|---|
| Angle | Straight, 45° or 90° |
| Material | Anodised aluminium |
| Type | Goodridge 600 Series reusable, female (6001-06D / 6046-06D / 6091-06D) |
Supplied
Not included
The hose size. The D6 fitting is for Goodridge 600 Series hose in size D6, the D4 fitting for the smaller D4 hose. Both come straight, at 45 degrees and at 90 degrees.
Goodridge 600 Series stainless braided hose in size D6, such as the D6 Teflon hose in the KMP range.
When the hose has to turn close to the port, where a straight fitting would force a tight bend. Choose 45 or 90 degrees depending on the direction of the line.