Anodised aluminium reusable hose end for Goodridge 600 Series hose in size D4, female, available straight, at 45 degrees or at 90 degrees. The fitting KMP recommends for the pneumatic circuit of a paddleshift system, matching the D4 Teflon hose CL in the same range.
SKU 01.09.004X · € 21.00 ex VAT · Motorsport / Other
The D4 fitting is a Goodridge 600 Series reusable hose end in anodised aluminium, female, made for stainless braided hose in size D4. Three angles are available from one product page: straight (Goodridge 6001-04D), 45 degree (6046-04D) and 90 degree (6091-04D). Reusable means the hose is assembled with hand tools and the fitting can be taken off and refitted when a line is rerouted or shortened.
KMP recommends this hose and fitting combination for the pneumatic circuit of its paddleshift systems, between compressor, air buffer, valve block and the shift and blip cylinders. The straight version suits a line that runs in free space; the 45 and 90 degree versions turn the line at the port where space around a cylinder or valve block is tight. Each order line is one fitting in the chosen angle.
| Hose size | D4 |
|---|---|
| Angle | Straight, 45° or 90° |
| Material | Anodised aluminium |
| Type | Goodridge 600 Series reusable, female (6001-04D / 6046-04D / 6091-04D) |
Supplied
Not included
Straight where the line leaves the port in free space, 45 or 90 degrees where the hose has to turn close to the port, for example next to a cylinder or valve block. A circuit often uses a mix of angles.
Goodridge 600 Series stainless braided hose in size D4, such as the D4 Teflon hose CL in the KMP range.
Yes. It is a reusable 600 Series fitting: the hose is assembled with hand tools and the fitting can be removed and refitted.