12 V compressor that supplies the paddleshift system with compressed air up to 11 bar. Cooling ribs with a special coating extend the duty cycle, and a control PCB with a Deutsch Autosport connector at the front switches the compressor on when the signal wire is pulled to ground. Three rubber feet and blind rivet nuts included.
SKU 01.02.0211 · € 875.00 ex VAT · Motorsport / Paddleshift components
The IDC D4 compressor is the 12 V air supply of the pneumatic paddleshift system, with a maximum pressure of 11 bar. Its cylinder head carries cooling ribs with a special coating, which increases the duty cycle the compressor can sustain.
Control is built in: a PCB with a Deutsch Autosport connector is mounted at the front of the compressor, and the compressor turns on when the signal wire is pulled to ground. The compressor comes with three rubber feet with M6 thread and blind rivet nuts for mounting. The mating connector (AS612-98SN) is not included.
| Supply voltage | 12 V |
|---|---|
| Maximum pressure | 11 bar |
| Control | Signal wire to ground via PCB with Deutsch Autosport connector |
| Mounting | 3 rubber feet, M6 |
| Running current | 17 Amps |
Supplied
Not included
Through the PCB at the front: pulling its signal wire to ground turns the compressor on. The Deutsch Autosport mating connector is not included.
11 bar.
On the three supplied rubber feet with M6 thread, using the blind rivet nuts that come with the compressor.