Compact race hub, 84.5 mm across and 50 mm high, for the 48-tooth BMW spline used from the E8X 1 Series to the G8X M3 and M4. Black anodised 7075 aluminium for builds without a clockspring, no welding, and six M5 threads on 70 mm PCD for a racing wheel or KMP adapter.
SKU 01.06.12002 · € 150 ex VAT · Automotive Electronics / Hubs
At 84.5 mm across and 50 mm high, this is a far smaller part than the clockspring hub for the same cars. It fits the 48-tooth, 18.2 mm spline BMW used from the E8X 1 Series through the F and G chassis, including the F87 and G87 M2, the F80 and G80 M3 and the F82 and G82 M4, without welding. The hub is 7075 aluminium, black anodised, and made in the Netherlands.
The six M5 threads on a 70 mm pitch circle diameter (PCD) take a racing wheel or any KMP adapter, from the crash hub to the quick release and quick release connector. Mounting hardware ships with the hub. Cars that keep the factory clockspring use the BMW F8X/G8X Steering wheel hub instead.
For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.
| Material | Aluminium 7075, black anodised |
|---|---|
| Wheel mounting | 6x M5 on 70 mm PCD |
| Clockspring | Not used |
| Spline | 48 teeth |
| Spline diameter | 18.2 mm |
| Outer diameter | 84.5 mm |
| Total height | 50 mm |
Supplied
The 1, 2, 3 and 4 Series from the E8X generation through the F and G chassis on the 48-tooth, 18.2 mm spline, including the M2, M3 and M4. The compatibility tab lists every confirmed chassis.
It is black anodised, much more compact (84.5 mm against 125 mm) and made for builds without a clockspring. The steering wheel hub keeps the clockspring and its unlocking pin.
No. The hub fits the shaft spline directly.