BMW E46 Steering wheel hub

Clockspring-compatible steering wheel hub for the BMW E46 M3, machined from 7075 aluminium to the 66-tooth, 21 mm steering shaft spline. The factory clockspring and its unlocking pin stay in place, and a quick release adapter or motorsport wheel bolts on with six M5 bolts on a 70 mm pitch circle.

SKU 01.06.11000 · € 200 ex VAT · Automotive Electronics / Hubs

On the BMW E46 M3, this hub takes the place of the factory steering wheel on the column while the original clockspring stays in service, unlocking pin included. It is machined from 7075 aluminium to the car's 66-tooth, 21 mm spline and measures 130 mm across and 80 mm in height.

The wheel side carries six M5 threads on a 70 mm pitch circle diameter (PCD) for a quick release adapter or a motorsport steering wheel, and two sets of six bolts are supplied. An E46 that runs without a clockspring uses the BMW E46 Race hub instead; KMP's own plug-and-play wheel for the car is the BMW E46 PRO-Line.

For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.

Technical specifications

MaterialAluminium 7075
Wheel mounting6x M5 on 70 mm PCD
ClockspringCompatible, including the unlocking pin
Spline66 teeth
Spline diameter21 mm
Outer diameter130 mm
Total height80 mm

Fits

What's in the box

Supplied

FAQ

Which BMW E46 does this hub fit?

It is made for the BMW E46 M3 steering shaft, with a 66-tooth spline of 21 mm. The compatibility tab lists the confirmed vehicle.

Should an E46 build use this hub or the E46 Race hub?

This hub, when the factory clockspring stays in the car. The BMW E46 Race hub is the black anodised alternative for builds without a clockspring, where the wheel's signals run through a quick release connector or a curly cable.

What bolts onto the hub?

A quick release adapter or a motorsport steering wheel with a 70 mm PCD, fixed with six M5 bolts. Two sets of six bolts are in the box.

Home · Automotive