BMW E46 Race hub

Race hub for the BMW E46 M3 and the E36, black anodised 7075 aluminium machined to the 66-tooth, 21 mm spline, for builds without a clockspring. It installs without welding and takes a racing wheel or a 70 mm PCD adapter on six M5 threads, such as the KMP crash hub, quick release or quick release connector.

SKU 01.06.12000 · € 150 ex VAT · Automotive Electronics / Hubs

Built for an E46 M3 or E36 that has lost its clockspring, this race hub fits the 66-tooth, 21 mm steering shaft spline of both cars without welding. It is machined from 7075 aluminium and black anodised, and keeps the mass on the column low, which suits a stripped track or race car.

Six M5 threads on a 70 mm pitch circle diameter (PCD) mount a racing wheel or a KMP adapter: the crash hub, the quick release or the quick release connector, which carries the wheel's signals once the clockspring is gone. Mounting hardware is included. If the clockspring stays, use the BMW E46 or BMW E36 Steering wheel hub.

For off-road and track use only. These products are not road-legal, and KMP accepts no legal responsibility for use on public roads.

Technical specifications

MaterialAluminium 7075, black anodised
Wheel mounting6x M5 on 70 mm PCD
ClockspringNot used
Spline66 teeth
Spline diameter21 mm

Fits

What's in the box

Supplied

FAQ

Does the race hub fit the E36 as well as the E46?

Yes. The E46 M3 and the E36 share the steering shaft spline. For a car that keeps its clockspring, use the BMW E46 or BMW E36 Steering wheel hub instead.

How do the wheel's signals reach the car?

Through a quick release connector or a curly cable, since there is no clockspring.

Does fitting require welding?

No. The hub is machined to the 66-tooth, 21 mm spline and fits the shaft directly. Without a clockspring, the KMP quick release connector carries the signals.

Home · Automotive